Let water flow and prevent frozen pipes.
Pipe Freeze Protection
VineHeat offer the heat tape for pipes is a constant power heating cable for pipes that is a DIY-friendly and economical selective.
VineHeat offer the heat tape for pipes is a constant power heating cable for pipes that is a DIY-friendly and economical selective.
VineHeat pipe freeze protection is use wrap the heating cable around pipes mainly used to install on metal and PVC water pipes to Protect your water pipes from freezing can prevent restricted flow and the dreaded burst pipe.
Effective Pipe Freeze Protection with DIY-friendly Heat Tape
Why Install VineHeat Pipe Freeze Protection?
Innovation
VineHeat Small Innovations, Big Surprises Await
Self-adhesive heating cable help user Installing heat tape on pipes is a snap
Mouse Hover to Flip
Self-adhesive
Self-adhesive heating cable help user Installing heat tape on pipes is a snap
Why VineHeat?
DIY-friendly
Installing heat tape for pipes is so easy, you dont need to remove the pipe, the unique self-adhesive layer help you stick the pipe heating cable onto existing pipes.
Wide range of application
Versatile Pipe Heating Cable for All Types of Pipes - Indoors and Outdoors, different material from plastic pipes to metal pipes.
Energy saving
When the envirement temperature below 40°F/4°C the heating cable with intergrate energy saving thermostat will automatically heating up, help regulate pipe temperature, allowing water to flow freely through your pipes. the light on the plug will light up to show that power is being supplied to the heating cable.
Detail Design
Pipe Freeze Protection Installation
Safety Tips for Install Pipe Freeze Protection:
Any alteration of the pipe heating cable length could result in electrical shock or fire.
The pipe heating cable must NOT run through building walls, ceilings, or floors.
Use the self-adhesive on the cable together with the Velcro strips provided.
To avoid overheating, the pipe must be continually full of water and the thermostat, and the entire pipe heating cable must be in direct contact with the pipe.
Save time and money
Quick installation provides protection all winter
Smart Indicator Light
Green light indicator light lets you know the power is on.
built-in thermosta
A built-in thermostat powers the cable only when needed.
UL Certificated
Promise protect your home in the most severe condition.
Warning
Do not use on waste.
lines, drain lines, fuel lines, or hoses.
Do not use a Pipe Freeze Protection Cable for roof and gutter deicing applications.
Improper installation use and maintenance of electrical heating cable can cause fire, electric shock, and freezing of pipe.
Make sure there is a properly grounded electrical outlet close enough to plug in the cable.
Heating cables must be installed in compliance with the U.S. National Electric Code and Canadian Electrical Code. Ground fault.
protection (GFCI) of the power supply circuit is required.
Proper installations are based on the use of VineHeat specified parts only.
Do not connect power to the heating cable while it is coiled.
Do not install a damaged heating cable.
Never allow the heating cable to touch, cross, or overlap itself at any point.
Disconnect the cable from its power source during installation.
Always keep the heating section of the system at least 1” away from combustible surfaces.
Always one option fit for you pipe
Wide range specification for pipe heating wire
Model Number
Length(ft)
Power(W)
Current(A)
Voltage(V)
- VFP1-003
- VFP1-006
- VFP1-012
- VFP1-018
- VFP1-024
- VFP1-030
- VFP1-040
- 3
- 6
- 12
- 18
- 24
- 30
- 40
- 21
- 42
- 84
- 126
- 168
- 210
- 280
- 0.2
- 0.4
- 0.7
- 1.1
- 1.4
- 1.8
- 2.4
- 120